F1105P-4-63W is a 5-port 10/100Mbps unmanaged switch that requires no configuration and provides 4 PoE ports. It can automatically detect and supply power to all IEEE 802.3af/at-compliant Powered Devices (PDs). Enabling "Ethernet Extend Mode" makes Ports 1-4 negotiate to 10M full-duplex rate and isolate from each other, but all communicate with the Uplink port. In this mode, the transmission distance is up to 250m. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
Easy to Deploy
Power Supply up to 250m(820 feet). Up to 250m PoE distance allows you to expand your network via Ethernet cable to where there is no power line or outlet but where you want to fix devices such as APs, IP Cameras or IP Phones, etc..
Stable Power Supply
Power Supply with 8-core Ethernet Cable. Innovative energy-efficient technology saves power consumption up to 70%, making it an eco-friendly solution for your business network. Additionally, up to 6KV lightning protection brings safe and stable power supply up to 100,000 hours.
Supports IEEE 802.3af/at power supply standard with single port power supply up to 30W. It also can automatically detect powered devices to supply power which will help protect the system when the system power is overloaded.
Exceptional Data Processing Ability. Featuring store-forward switching architecture with backpressure up to 1Gbps, all ports forwards and filters packets at full wire-speed for maximum throughput. 4 HD IP Cameras can be accessed at the same time. Flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make the IP-F1105P work reliably.
Durable & Secure
Superior quality & design. The full-metal design makes the IP-F1105P a reliable & durable choice. Its unique cooling design ensures long-time operation stability
Users must ensure that their connected device keeps within the maximum PoE power permitted per LAN port of the switch or injector and also the total power for all connected devices is less than the maximum total PoE power that the switch or injector can provide. For example, if the PoE switch is maximum 30W per port (so it conforms to 802.11at) but the maximum PoE power for the switch is 60W and the access point you are connecting is 18W maximum then, even if the switch has 8 PoE LAN ports, you can still only power a maximum of three access points.
Damage caused to the switch or injector by over loading the power budget is NOT covered by warranty.