
|
Frequency Range
|
2.4~2.5GHZ WiFi |
|
Impedance |
50 Ohm |
|
V.S.W.R. |
<1.5:1 |
|
Gain |
7 dBi |
|
Radiation |
Omni |
|
Polarization |
Vertical |
|
Electrical Wave
|
1/2 Wave |
|
Cable |
RG142 |
|
Standard Connector
|
N/Female |
|
Length(Total) |
670 mm |
Fitted
with N female connector on 20cm tail
Stainless & Comp whip antenna for truck, Caravan &
Marine use mounting. Very flexible mounting options:-

Close ups of supplied mount on a copper pole. The four holding bolts
can be turned 90 Degrees to allow for mounting on a horizontal
pole or removed completely to let the mount be screwed directly to any
flat surface, otherwise the cone can be removed from the 90degree
bracket and drilled and bolted directly.(Copper pole not supplied)
£24.00 ex vat (28.20 inc vat)
Stock level 10+

For a complete mobile solution
combine the antenna with:
e.g.
The Antenna is mounted outside, the coax cable then comes indoors and
connects to the external port of the USB adapter, RG58 coax will lose
0.78 of a dbi of signal per metre, HDF400 will lose 0.22dbi per metre (subtracted from the antenna gain) so
please keep this as short as possible, the USB adapter can then
mounted out of the way and the rest of the cable run is then done with
the USB active cable indoors as this has no signal loss, this can then hotplug
into your computer/notebook as necessary.