faculty-x Wireless antenna

Wireless Antenna, WiFi & Homeplug Network Supplier.
Long Range Wireless Bridge & Hotspot Equipment


Wifi antenna logo

 No hidden charges - No gimmicks. Our shipping charges are clearly shown by clicking checkout at anytime and we never send spam. No need to register...EVER

Ultra Long Range Wireless Outdoor Multi-Client Bridge / Access point / repeater

 
The EnGenius Outdoor 3610 provide a complete solution where you need to supply a reliable wide area network connection using a 2.4GHz wireless link. The NOC-3610 products are a full, professional package which combines all the functions and features you need to allow you to offer your customers a reliable internet link.
 
The NOC-3610 are fully outdoor compliant products which permit you to supply an integrated solution rather than an amateur, piece-meal solution using an indoor product mated to outdoor antenna.
 
features include:
upto 600mW RF output power for greater range
external antenna connector RP-SMA with supplied 5dbi antenna (upgradeable)
PoE compatible for flexible deployment and includes PoE Injector an power supply
802.11 b/g wireless Client Bridge/Access Point
IP67 rated enclosure for high resistance against dust, water, and weather conditions
802.1x, WEP, and WPA2 security
AP, Bridge Client, Bridge Router, WDS repeater functions
 
Full box contents image:-

The Outdoor Wireless Multi-Client Bridge/Access Point/ WDS (wireless distribution system) operates seamlessly in the 2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbps) wireless standards. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation. Four user adjustable power levels allow up to 26dB. Please note: The power level should be adjusted so as to stay within the legal EIRP limits).

To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA. The MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point/WDS, you'll experience the best wireless connectivity available today.

Setup is very straight forward if you have an existing network and you need to share this wirelessly to multiple clients outside.
In essence you connect one end of a lan cable into a free port on your existing network (standard wirelessly routers usually have four), the other end goes into the "network" side of the power injector

The injector then has a second Lan cable, one end in the "AP" the other end is taken outside and plugs into the NOC unit itself, this cable will then take both the network signal  and the electric to power the unit.

The advantage with this is that you do not have to worry about location for the outside unit with regards to power supply.

The unit when set to access-point will provide your clients with an ip address each controlled via the dchp server.

If the site is very large or there a dead spot in the signal, a further unit set as repeater can be used by simply installing a further unit to pick the weak signal up and re broadcasting out at full strength again, after setup this unit needs no connection to a wired network, only  a power supply:

Full specs:

High Speed Data Rate Up to 54Mbps Capable of handling heavy data payloads such as MPEG video streaming
High Output Power up to 28 dBm Excellent output power spreads the operation distance
IEEE 802.11b/g Compliant Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices
Point-to-point, Point-to-multipoint Wireless Connectivity Let users transfer data between two buildings or multiple buildings
WPA/ IEEE 802.1x Authenticator support Powerful data security
WDS (Wireless Distribution System) Make wireless AP and Bridge mode simultaneously as a wireless repeater
Watertight and Weatherproof Avoid water invaded and weather corroded
Wide temperature range and robust mechanical design Delivers reliable, top performance in the most demanding environments
Power-over-Ethernet (IEEE802.3af Compliant) Flexible Access Point locations and cost savings

   16.3 cm x 13.5 cm x 4.7cm

RP-SMA antenna connector mounted on top of box

 

£155.00 ex vat (182.12 inc vat)


### Please Note ###

DSC00761

You will also require two LAN cables, one from network to the injector and the other one into the unit itself from the power injector to carry the current and network signal. Various lengths available to suit your situation here

 

VAT number 867 4503 00 - WEEE Registration number WEE/EF0002ZR
Faculty-X
Wireless Antenna & WiFi Antenna Network Equipment Supplies - site design © Faculty-x 2007

UK Free Directory - FreeIndex.co.uk