October 22, 2014
Due in or around the second week of November 2014
These plugs along with our other plug we currently have in stock, the Tenda p1000 use the latest Qualcomm Atheros QCA7500 chipset so give the same actual output and all have gigabit Ethernet ports. The Solwise model however has two Gigabit ports per plug, the Tenda p1000 only one.
The QCA7500 chipset uses an 2×2 MIMO Dual Intergrated analogue front end line driver with beamforming to extend coverage meaning that two transmitters are able to transmit on any two of three plug pairs: Line, neutral and ground at the same time.
They both also repeat the signal of other plugs in the AV2 network to extend signal coverage and robustness.
With pass through mains plug you will not be losing a power socket with the Solwise PL-1200AV2-Piggy as with all our pass through mains homeplugs the mains plug on the unit is filtered to stop rogue frequencies from disrupting the plugs.
We shall run a test with these and the Tenda P1000 and add to our rough and ready real world speedtest in due course but first signs are pretty good, with a rough and ready test giving 270-ish mbps on actual thoughput across our system with the Tenda
October 28, 2013
Due in November 2013.
Solwise PL-600AV-SMT-PIGGY 600mbps Homeplug AV2 Pass through Powerline adapters
Following on from the very popular http://www.faculty-x.net/NET-PL-500AV-piggy.htm with pass through by solwise We are very pleased to be able to offer these superb Solwise 600mbps Homeplug AV2 network adapters.
These adapters have proven to be very relaible and have scored well on various independant review sites for throughput and use, the 600mbps units should blaze with speed.
The 600mbps units will come with gigabit port and coloured led to show throughput link speed along with the standard sync button.
Backwards compatible with 200av & 500mbps AV homeplugs on latest firmware, these will make an ideal unit to slowly replace the older speed units over time.
Just £27.50 and in stock November 2013
October 17, 2013
These are our fastest homeplugs yet and fresh to the market, still waiting for confirmation if they are Actually Homeplug AV2 standard but certainly hinting at it, backwards compatible with 500mbps homeplug AV so a good way to slowly speed up an existing network one link at a time.
Would be great running from a NAS home server or streaming 3D and HD media
Currently in quite limited numbers as they are so new and £39.50 for a starter pack
The model is nice and compact (63×47×40mm) and of a very high finish.
10/100/1000 Gigabit Ethernet ports are fitted so not bottleneck here.
Available now from stock HERE
May 21, 2013
New product just in:
500mbps Wireless homeplug and 2 ethernet ports for £34.95
The unit will work with all 500mbps Homplug AV homeplugs as well as 200mbps homeplugs on firmware 3 and above.
We have re-configured these away from the factory default setting so they are ready to work straight away with an existing or new homeplug network installation off an existing router. This is by far the most common setup for homeplug networks.
These can however be setup to work as the router with DCHP running if you are not extending and existing routers connection but wish to instead run these direct off a wired network provider or wired modem link.
Want to extend your existing 500mbps or 200mbps homeplug network wirelessly into a wireless deadspot in your house?
This item is the perfect answer, the unit is both a 500mbps homeplug with 2 network ports and also a wireless network point, simple plug a standard 500mbps homeplug into a power socket near your router with an network cable between the homeplug and router and then plug this wireless homeplug in a location were the wireless signal does not reach from your router, scan for available networks and select this plugs default wireless network name “powerline” enter the default wpa password 1234567890 and your online again.
The two wired network ports can be used at the same time as the wireless so is ideal to place near your TV & media centre devices to allow say a wired connections to your sky+ HD box, freeview player or internet ready TV to enable on demand services as well as service wireless devices in the vicinity like tablets, laptops and mobile phones that cant reach your existing wireless router.
Your are able to change wireless network name and password if you prefer, we have just preconfigured these so they are ready to work straight away for you.
The plugs also have a router mode so you can plug a wired modem into the WAN port with DCHP server to control the network address of attached devices, this however is not the common setup option for homeplug users so we have set it up to be plug and play with existing or new homeplug installation with a connection to your own router.
We have created two purchase options, either a single unit to add to an existing 500mbps homeplug network or a starter pack with both units required to extend your wireless network from scratch i.e. the standard plug for the router connection as well as the wireless plug to use in the wireless deadspot. You can also add more stand alone units to the starter pack if required to create more wireless spots if you have a large or awkward shaped house for the existing wireless network.
Power voltage range is 100 to 240 V AC 50/60Hz.
Supports HomePlug AV protocol and the IEEE1901 protocol.
PLC physical link rate is up to 500Mbps.
Support the following modulation schemes: OFDM QAM 4096/1024/256/64/16/8, QPSK, BPSK, and ROBO.
Supports 128-bit AES link encryption and user NMK authentication, for providing secure power line communication.
Supports windowed OFDM with noise mitigation based on patented line synchronization technique for improving data integrity in noisy conditions.
Supports channel self-adaptation and channel estimation for maximizing real-time throughput.
Supports priority-based CSMA/CA channel access scheme for maximizing efficiency and throughput.
Supports four-level QoS.
Supports ToS and CoS packet classifications.
Supports IGMP multicast management session.
Supports IEEE802.11b, IEEE802.11g, IEEE802.11n, IEEE802.3, IEEE802.3u, IEEE802.11i and IEEE802.11e.
Supports 2T2R mode. Transmission data rate is up to 300Mbps.
Supports WEP and WPA for secure data transmission.
Supports DHCP server.
Supports version upgrade through Web page.
Supports restoring factory default settings.
Supports the following wireless security modes: WEP, WPA-PSK, WPA2-PSK, and WPA/WPA2-PSK
Supports system status display.
Supports system log.
April 16, 2013
Just in and a great addition to our range:
500mbps pass through homeplug with three ethernet Lan ports and just £21.99
Will make a great addition to your existing 500mbps homeplug network at media centre hub to enable 3 devices to share one homeplug whilst not taking up a plug socket.
The NLHP-5003PORT is compliant with HomePlug AV specification and has a high speed transfer rate of up to 500 Mbps. The Powerline Ethernet Adaptors have 128-Bit Encryption with key Management. A minimum of two adaptors are needed and more can be added as the network grows, would make the perfect extension to an existing 500Mbps network.
The home plug acts as a 3 port network switch and can be secured or added to a network group using the utility provided.
Estimated range of 300 meters in wall power lines
No problem for the HomePlug signal to pass through circuit breaker
128-bit DES encryption assures data security
Encryption done by hardware, with no sacrifice on bandwidth
Plug and Play installation
HomePlug Powerline AV specification compliant, this means they are interoperable with other HomePlug AV 200mbps & 500mbps devices on version 3 firmware and above.
November 21, 2012
Our latest deal on homeplug network plugs is pretty special.
This is only whilst stock last and these are going pretty quick.
A easy way to hook up your smart TV, Sky HD box to enable the on demand services & anytime+ and freesat boxes to enable iplayer.
All of these items needs cabling up to your broadband router so the content can be downloaded but running a ethernet cable from your router to your TV system can not always be accomplished easily, with homeplugs you simple connect one to your router via the supplied cable and plug it in nearby, plug a second homeplug next to the device that needs the internet, connect the cable and its online.
No messy cables, no software to install as they are ready to go.
Of course if you can run a network cable this will be the cheapest option, we have those too. A standard cat5e cable is ample for this duty.
If you need help deciding which ones to buy or any advice on Homeplugs, power line networking or network cables, give us a call or drop us an email, we are always glad to help, we still love getting regular mail also.
October 17, 2012
We now have in stock the latest homeplugs on the market and the first at the moment to combine 500mbps homeplug Network speed with gigabit ethernet port and Wan/Lan port for routing from a modem if required along with 300mbps N wireless at £68.50
Available to buy here
The Unit is a very well built system with lots of the buttons hard-wired instead of software controlled:
The unit comes with two ports, 1 gigabit ethernet port and 1 Wan port to connect a modem for routing, the second Wan port can also be set to act as a 2nd Lan port instead.
Prices on the first batch are going to be circa £78.00 but this is subject to final confirmation & currency rates in force at the time. These are hopefully due in end of this month or early November.
To receive an email notification when they are in stock please click here
Further detailed spcification and data sheet here
As is our normal policy will will not send spam or other marketing as we hate junk email as much as the next person, you’ll receive just the one email notifying you when the buffalo 500mbps WiFi Homeplug is in stock to purchase and then we will delete your email address.
July 11, 2012
Brand new stock of our best value 200mbps home plug kit
EDIMAX HP-2003AVK 200MBPS HOMEPLUG KIT £26.95
- Complete HomePlug starter kit, includes everything you need
- Complies with 200Mbps HomePlug AV and IEEE 802.3/802.3u standards
- Utilises existing electrical wires to transmit network data
- Supports 128-bit AES link encryption
- Features IGMP, QoS, a group button, and a reset button
- Powerline transmission range up to 300 meters
200Mbps HomePlug AV Standard & IGMP Support
The Edimax HP-2003AVK starter kit not only complies with the HomePlug AV standard but also supports IGMP managed multicast streams. HomePlug AV is the next generation powerline technology that provides high-speed data rates of up to 200Mbps and transmission range of up to 300 meters. IGMP can be used for online gaming and video streaming applications, and allows for more efficient use of network resources. With this Edimax HP-2003AVK, you will be able to transfer high-definition video and digital audio quick and easily.
Hardware Group & Reset Buttons
The Edimax HP-2003AVK adapters have both a group button and reset button for simplified group and reset configurations. Press the group button and the Edimax HP-2003AVK adapters will help you set up a password for your network automatically. Press the reset button to reset the device to factory defaults.
128-Bit AES Encryption
Built in compliance with the 128-bit AES encryption standard, the Edimax HP-2003AVK is able to give you superior powerline network security.
May 23, 2012
Single Ethernet Port
Atheros AR6405 chipset
Ideal for extending your wireless signal coverage for Internet access or to make a local area network(LAN)
Push button for SimpleConnect
1 network cable included
This 200Mbps powerline wallmount adapter is designed for transmitting data up to 200Mbps (HomePlug AV) across the household power line. Every power socket could become a network connection ensuring even complicated corners that were unreachable with wiring are now able to get online conveniently. Applications:
- Shared broadband internet access
- Higher data rate broadband sharing for power line LAN
- Backbone for Wireless and Wireless Adapter
- TV over IP (IPTV) and Voice over Internet Protocol (VoIP)
- High Definition (HD) and Standard Definition (SD) video distribution
- Video surveillance
- Online Gaming
May 15, 2012
The NL-HP2MINI is compliant with HomePlug AV specification and have a high speed transfer rate of up to 200 Mbps. The Power line Ethernet Adapters 128-Bit encryption with key management. A minimum of two adapters are needed and more can be added as the network grows.
High-Speed Powerline adapter with Ethernet interface for fast data transfer over existing household electrical circuit.
Fully compatible with HomePlug AV
128 Bit AES link encryption with key management for secure communication.
High-Speed transfer rates of 200 Mbps makes it possible to transfer any type of data.
Use existing electrical wiring at any power sockets with up to 200 mtrs operation range.
Simple plug and play installation.
Supports 10/100 fast ethernet connection.
Supports Auto MDI / MDIX.
Allows users to connect PCs, notebooks and other Ethernet devices via any power socket.
Low power consumption.
Supports all Windows, Mac & Linux computers, consoles, iplayer, Freesat & SKYHD anytime+ boxes with an ethernet/Network/Lan port.