Customer Reviews Cookies Contact Us Tel: 020 3239 6201
faculty-x Homeplug logo 85mbps Homeplug Adapter
Use to extend or replace older style homeplug systems.
For new systems consider 200mbps or 500mbps
basket
Total:  

Basket / Checkout
delivery logo

Aztech 85mbps Homeplug 1.0 Turbo


homeplug fronthomeplug rear
View from front & back of a single unit for clarity only.

Single Unit
14.99
(12.49 ex vat)

Stock level:

Package contents
1x 85mbps Homeplugs
1x 1 metre lan cable
1x CD-rom setup disk

reviews

Homeplug 1.0 Turbo 85mbps Adapters Model: Solwise (Aztech branded)

Electrical power is supplied and distributed around your house at 50Hz. However, the wires are actually capable of carrying a range of other frequencies which can be 'tuned-in' using appropriate equipment. Powerline Homeplug technology takes advantage of this unused bandwidth of the electrical wiring in the home.  

The signal can travel between floors of a house even when they are on a different ring main, as long as they are on the same consumer/fuse-box your side of the meter.

Works with just about anything with an Ethernet port and is driverless and easy to setup, just plug one in near your broadband router and connect the supplied cable from the homeplug to a free port at the back of your router, do the same the other end at the internet enabled equipment you wish to connect and you are done.
PC, Mac, Linux, PS3, Xbox including Xbox 360 and Youview, Smart TVs and Sky HD anytime+ boxes. all just plug in and are away.
If you do manage to find an Ethernet device it will not work with you are welcome to send them back for a full refund. No quibbles.
Fully homeplug 1.0 compliant so will work with all other 14mbps & 85mbps compliant plugs.

 Just plug the adapter into the power socket on the wall, and connect any Ethernet-equipped device to the adapter, put another adapter in the location you are trying to reach and bingo, it then simply converts the network signal to a signal that can be sent down your electrical wiring and then at the other end converts it back again.

PLEASE NOTE: You need at least two homeplugs to make a network (one each end of the link)
But you can add more than two to the network, you still only require one at your router regardless.

Longer cables are available if required here

 

Compatibility: Homeplug 1.0 & homeplug 1.0 Turbo compliant, these inter-operate with other homeplug models that are to this standard, i.e. Solwise, Actiontec, Arkados, Aztech, Belkin, Cameo, C-net, Cisco, Devolo, Dynamode, Echostar, Econnect, Fujitsu, Gigafast, Intellion, Lea, Netgear, Vesenet & ZyXEL at both 14mbps & 85mbps, got another make or model and not sure, please just ask: Homeplug-info@faculty-x.net
However: Homeplug 1.0 & 1.0 turbo do not work with Homeplug AV at 200mbps & 500mbps, you can have both on the same circuit and they will communicate over each other, i.e have two networks at different speeds but will not talk to each other.

 

Just plug the adapter into the power socket on the wall, and connect any Ethernet-equipped device to the adapter, put another adapter in the location you are trying to reach and bingo, it then simply converts the network signal to a signal that can be sent down your electrical wiring and then at the other end converts it back again.

Contact Us Information Payments accepted

T: 020 3239 6201
 F: 087 1900 1609

       E: sales@faculty-x.net

Telephone hours
Monday to Friday
10:00 to 16:00


Address: Faculty-X, 21-23 Queen Street,
Brightlingsea, Essex. CO7 0PH

Downloads

Privacy Policy

Order Tracking

Homeplug FAQ's

Terms and Condition

Environment / WEEE


Faculty-X.net  Homeplug Network, Wired Networks & Wireless Network Equipment Supplies - Site Copyright 2004 - 2014 Faculty-x