Wireless 802.11 a/b/g Outdoor Access Point / Client Bridge, 13dB
panel antenna - EOC-5610
The EOC-5610
is a fully UK legal building to building WiFi bridging device
allowing both Band C (IR2007)
requires a licence from Ofcom - circa £50,
link to apply & further info
here, and Band B
(IR2006), which is the unlicensed band. The EOC-5610 is ideal for
Point-to-Point links in urban environments in particular where an
area is saturated with 2.4GHz frequencies.
The EOC-5610
is a long range outdoor wireless Access Point / Client Bridge that
operates in both 5GHz and 2.4GHz frequency. The eoc-5610 has high
transmitted output power as well as superior receive sensitivity.
The EOC-5610 extends radio coverage, avoiding unnecessary roaming
between Access Points and ensures a stable wireless connection while
reducing the number of required node.
The EOC-5610 provides a user friendly interface including distance
control on ranges from 1km up to 30km and a RSSI LED indicator
offering real time signal status. It comes with a Power over
Ethernet injector for convenient outdoor installation.
The EOC-5610
fully supports 64/128-bit WEP, WPA and WPA2. With a 13dBi internal
antenna and superior performance the EOC-5610 makes an ideal
wireless solution for both small and large scale projects. The
device has reverse SMA antenna connectors for both 2.4GHz and 5GHz
allowing you to fit your own external antenna.
Despatched with UK legal firmware. EnGenius cover this product
with a 2 year manufacturer’s warranty.
Link to
Ofcom faq site for 5GHz operation -
5.8GHz FWA
£67.23 ex vat (80.68 inc vat)
In stock 10+
Full specification
|
Wireless |
- 5GHz / 2.4GHz
It works in 5GHz / 2.4GHz frequency spectrum
- High output power Transmit output power programmable for
different country selections
- High Data Rate High speed transmitting rate up to 54Mbps,
supports large payload such as MEPG video
streaming
- Multifunction application Access Point/Client
Bridge/Client Router
- Long range transmitting Transmit power control and
distance control (ACK timeout)
- Signal Strength Display LED indicators have the best
transmit and receive signal for traffic
communication. And RF signal strength status shown LEDs of 3
colors, making network build‐up easier
- Public wireless solution An AP interface that is
especially useful in public areas such as hotspots and
enterprise
- QoS(WMM) Enhance performance and density |
|
Networking |
- PPPoE
Point‐to‐Point Protocol over Ethernet at Client Router mode.
This function will keep trying when
failed or disconnected
- VPN Pass Through |
|
Security |
- 802.11i WEP,
WPA, WPA2 (Encryption support TKIP/AES)
- MAC address functions MAC address filter (AP mode)
- 802.1x IEEE802.1x Authenticator
- Station isolation |
|
Management |
- Firmware
Upgrade Upgrading firmware via web browser, setting are
reserved after upgrade
- Reset & Backup Reset to factory default. User can export
all setting into a file via WEB
- MIB MIB I, MIB II(RFC1213)
- SNMP V1, V2c |
|
Hardware
Specifications |
|
MCU/RF |
Atheros
AR2313+AR5112 |
|
Memory |
32MB SDRAM |
|
Flash |
8MB |
|
Physical
Interface |
1 x 10/100 Fast
Ethernet RJ‐45
1 x Reset Button
1 x Antenna Switch ( Internal and External Switch )
2 x SMA Connector ( One is for 2.4GHz and another is for
5GHz ) |
|
LED indicators |
Power/ Status
LAN (10/100Mbps)
WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
• Green: Good Quality
• Yellow: Marginally Acceptable Quality
• Red: Bad Quality |
|
Power
Requirements |
Active Ethernet
(Power over Ethernet) Proprietary PoE design
Power Adapter 24V / 1A DC |
|
Regulation
Certifications |
FCC Part
15C/15B/15E, EN301 893, EN 300 328, EN 301 489‐1/‐17,
EN60950,
IC Certification |
|
RF
Specifications |
|
Frequency Band |
802.11a =
5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.825GHz
802.11b/g = 2.412~2.472GHz |
|
Modulation
Technology |
OFDM = BPSK,
QPSK, 16‐QAM, 64‐QAM
DSSS = DBPSK, DQPSK, CCK |
|
Operating
Channels |
802.11a = See
the Table1
802.11b/g = 11 for North America, 14 for Japan, 13 for
Europe |
|
Receive
Sensitivity (Typical) |
802.11a
‐92dBm @ 6Mbps,
‐73dBm @ 54Mbps |
802.11g
‐92 dBm @ 6Mbps,
‐75 dBm @ 54Mbp |
802.11b
‐97 dBm @ 1Mbps
‐91 dBm @ 11Mbps |
|
Available
transmit power
(Average power) |
|
ETSI
|
|
Frequency
|
Power
|
5.150~5.350
GHz
IEEE802.11a |
26dBm@6~24Mbps
24dBm@36Mbps
22dBm@48Mbps
20dBm@54Mbps |
5.470~5.725
GHz
IEEE802.11a |
26dBm@6~24Mbps
24dBm@36Mbps
22dBm@48Mbps
20dBm@54Mbps |
5.725~5.825
GHz
IEEE802.11a |
26dBm@6~24Mbps
24dBm@36Mbps
22dBm@48Mbps
20dBm@54Mbps |
2.412~2.472
GHz
IEEE802.11g |
26dBm@6~24Mbps
24dBm@36Mbps
23dBm@48Mbps
22dBm@54Mbps |
2.412~2.472
GHz
IEEE802.11b |
27dBm@1~11Mbps |
|
|
Internal Antenna |
|
Antenna Specification
|
|
Gain |
5dBi |
13dBi |
|
Radiation |
Directional |
Directional |
|
Frequency Band Range |
2.4‐2.5GHz |
5.1‐5.8GHz |
|
Horizontal ‐3dB Bandwidth |
40° |
42° |
|
Vertical ‐3dB Bandwidth |
40° |
21° |
|
