 EnGenius Outdoor 3220 models
Noc-RP-SMA / noc-9db / noc-16db
Firmware version 1.41.05
Please Note:
Any failed firmware upgrade may result in permanent
damage to your device and will automatically void the warranty. Never
upgrade the device firmware via a wireless connection.
1. Log into the device. Go to Management > Upgrade Firmware (see screen
shot below)
2. Click on Browse or type the path to the firmware file.
3. Click upload.
The device may require 2 minutes to finish the process. After the
firmware upgrade, the configuration settings of the device will be reset
to factory default.
New Features added:
Add the IAPP function AP mode.
Add the PPPoE function in CR mode.
Add WISP Client Mode (client with router)
Changes:
To change the PPPoE MTU size form 1450 to 1492.
Solved the firmware will keep the state when flash reload to default.
Disable the URM in Adhoc Mode.
EnGenius is adding
“Universal Wireless Repeater” to the whole 3220 series
line. The new feature allows the 3220 to rebroadcast the SSID in Access
Point or Client Bridge mode for wireless clients to associate and then
gain access to the main wired router or access point
Note this f/w and these
new operating modes apply to all three units
Download 1.25mb
firmware zip-file
here
|
